Changzhou Gardensun Furnace PH01-S Instruction Manual

- 0 - INSTRUCTION MANUAL FOR TABLE TOP HEATER MODEL HPS-B ★ Certified to international recognized standards. ★ Variable control gas valve with piez

- 9 - PARTS AND SPECIFICATION • TANK COVER AND MOBILE STAND ARE NOT SUPPLIED AND ARE FOR ILLUSTRATIVE PURPOSES ONLY *

- 10 - A.Construction and characteristics ☆ Gas heater for garden table ☆ Textile tank cover(optional) ☆ Gas hose with metal screw clips ☆ Stainless

- 11 - ☆ Adjustable opening wrench (2) 20 cm long ☆ Slip joint pliers 23 cm long ☆ Philips screwdriver w/ medium blade ☆ Teflon plumbing tape for join

- 12 - 2-1. 2-2. 2-3. 2-4. Join 3pcs supporting bolts & 3pcs washers to the burner mesh. Put the burner mesh into burner base. Use 4 p

- 13 - STEP 5: 5-1. 5-2. Place 3 pcs castle nuts & 3 pcs washers on each reflector supporting bolts. Tighten each of the castle nut

- 14 - 7-1. Connect the regulator to the other end of the gas hose and connect it to your LPG gas tank. TANK COVER AND MOBILE STAND ARE

- 15 - PROBLEMS CHECK LIST PROBLEM PROBABLE CAUSE SOLUTION Pilot will not light Gas valve maybe OFF Turn the gas valve ON Tank fuel empty R

- 1 - TABLE OF CONTENTS ITEM DESCRIPTION 1 . WARNING SAFETY RULES······················································· 1 2 . READ SAFETY REQUIRE

- 2 - WARNING SAFETY RULES PLEASE READ THE FOLLOWING SAFETY RULES PRIOR TO OPERATION OF THE HEATER WWAARRNNIINNGG If you smell gas: 1. Shut off gas

- 3 - WWAARRNNIINNGG:: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the in

- 4 - WWAARRNNIINNGG:: 1. Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or cl

- 5 - TABLE HEATER STAND AND LOCATION ☆ The garden table heater is for outdoor use only. Always ensure that adequate fresh air ventilatio

- 6 - PROCEDURE FOR LEAKAGE TEST NEVER CONNECT AN UNREGULATED GAS SUPPLY TO APPLIANCE PRECAUTIONS ☆ Periodically check the whole gas system for le

- 7 - VISUALLY CHECKING BURNER FLAMES The flame pattern at the emitter grid should be visually checked whenever the appliance is operated. Under the

- 8 - CLEANING AND CARE 1. Wipe off tarnished surfaces with soft, moist rag. 2. Do not use harsh chemical or abrasives to clean the heater ho